Backyard Gazebo Canopy Manufacturer
Tensioned-fabric gazebos sized to a home — a cone or hypar canopy over a garden seating area, a deck or a patio, on a slender galvanised frame, in a chosen colour. Designed, fabricated and installed by Ekra Decor.
- Sized to your garden, deck or patio
- Slender frame, chosen colour
- Fast, low-disruption install
- Properly engineered — not a kit
Engineering Trusted by India’s Leading Names
28+ years delivering tensile structures for corporate campuses, industrial groups, and institutional developments — built with fabric technology from the world’s leading membrane manufacturers.
TATA Motors
L&T
Reliance
Adani
Mahindra
Godrej
DLF
ITC Ltd
Maruti Suzuki
GMR Group
JSW Steel
Prestige Group
Sobha
Siemens
Tata Chemicals
Tata Tele Business Services
Power Grid Corporation
Emaar MGF
National Law University Delhi
UPES Dehradun
Vasant Valley School
Aditya Birla Group
Amity University
Vikram Solar
Tractors India
Mazda Colours
Millennium Structurals
Sehwag International School
BSBK Pvt. Ltd.
17 Miles Hotel
Rich Harvest School
The Imperial New Delhi
Moore Constructions
Mehra Construction
Ramprastha
Minda NexGenTech (UNO Minda)
Yashmay Public School
Gyan Mandir Foundation
Omega Developers
SPEC
Serge Ferrari
Mehler
Heytex
Versaid
PATI
Fitting a gazebo canopy to a home garden
A backyard gazebo canopy should feel like it belongs in the garden — light, open and in proportion — not like a shed dropped on the lawn. Most of the decisions are about scale and how it sits among the planting.
Sizing
A 3 × 3 m canopy covers a four-seat table; 4 × 4 m a lounge set. Keep it in proportion to the lawn so it does not dominate the space.
Keeping it light
A single slim central mast, or two thin posts, fine cables and a curved edge — the aim is a canopy that appears to float rather than a solid roof on legs.
Blending in
Match the fabric colour to the house, or keep it neutral, and set the structure among planting rather than on a bare slab.
Permanent or seasonal
A bolt-down base lets you unbolt the frame and roll the membrane for winter; or it can be a fixed installation on a small footing.
Approvals and cost
A light garden canopy under a certain size usually needs no building permission, but check local rules and society bye-laws first. Cost follows size, fabric grade and whether it is waterproof or shade-only — see the cost guide.
Related: gazebo designs and ideas, tensile gazebos. Send your garden dimensions.
Gazebo canopy forms
At residential scale the canopy is as much a garden feature as a shelter. A single cone or a small hypar suits most homes.
Conical
The membrane is pulled up to a central high ring on a single mast, shedding water outward. The iconic gazebo shape — strong, self-draining, and striking from any angle.
Hypar / saddle
Four points, two high and two low, twist the fabric into a double-curved surface. A more contemporary look, efficient over a square footprint.
Small sail
A single anticlastic sail on two masts — the lightest, most economical option over a compact seating area or a hot tub.
Attached lean-to
A mono-pitch canopy fixed to the house wall where a free-standing frame will not fit.
Related: engineered gazebo tensile structures, outdoor tensile structures and custom fabric structures.
What is specified on a gazebo canopy
A backyard canopy is a compact structure — a slender frame, small pad footings, a chosen membrane colour — but it is still form-found and wind-engineered, not a bolt-together kit.
| Element | Options |
|---|---|
| Scale | Sized to a seating area, a deck, a patio or a hot tub — not a whole garden |
| Form | Conical, hypar, tiered dome, or multi-peak — chosen from the footprint and the setting |
| Membrane | PVC-coated polyester for most work; PVDF for a longer-lasting finish and colour hold; PTFE-glass for a permanent, non-combustible roof |
| Colour | Across the PVC and PVDF ranges; PTFE-glass is essentially white |
| Frame | Galvanised steel mast, rings and perimeter; painted or stainless-detailed where exposed |
| Sides | Open on all sides by default; screens or roll-down blinds can be added |
| Drainage | Off the cone or dome to defined low points, piped away where needed |
| Foundations | Pad footings to IS 456, sized for wind uplift and mast compression |
| Lighting | Uplighting onto the membrane for a soft glow after dark; wiring concealed in the mast |
| Scope | Survey, 3D design, fabrication, installation and tensioning — one in-house team |
General membrane figures — life, translucency, fire class — are manufacturer values for the material type, set out on the membrane materials page.
Membrane options
Backyard canopies are built in PVC or PVDF, in whatever colour suits the house and garden. PVDF stays cleaner and holds colour longer — worth it if the canopy faces the sun.
PVC-coated polyester
The most economical choice and the widest colour range; blocks the rain, hail and almost all UV. PVC fabric →
PVDF-lacquered PVC
The same base with a tougher top-coat that stays cleaner under dust and pollution. PVDF fabric →
PTFE-coated glass
Non-combustible and near self-cleaning, with the longest service life. PTFE fabric →
A full comparison of the fabrics — translucency, fire class, typical life — is on the membrane materials page.
How it is engineered and built
The governing load
A small, low canopy is a light structure, but wind uplift still governs and it is designed properly — form-found so the fabric is taut, steel to IS 800, and pad footings to IS 456 sized for the site’s design wind under IS 875 Part 3.
Steel & foundations to code
The frame is designed to IS 800 and the footings to IS 456, checked for uplift and overturning. Galvanising to IS 4759 / IS 2629 for corrosion protection.
Built off-site, raised fast
Steel is cut, welded and galvanised in the workshop and the membrane is cut and welded into panels, while the footings are cast on site. On-site work is then quick and low-disruption.
One accountable team
Survey, 3D design, fabrication, installation and tensioning are all Ekra Decor’s own team, with a handover pack of drawings, load report, stability certificate and material certificates.
What drives the cost
Cost is not a fixed rate per square foot — two structures of the same size can differ widely. The main factors:
A small sail is the most economical option; a cone or dome costs more. Send a plan or a photo of the area for a quote; see the cost guide.
Looking after the structure
- Cleaning — a periodic wash; PVDF and PTFE surfaces largely self-clean in rain.
- Membrane & seams — check the fabric for abrasion or coating wear, especially at the peak rings and corner plates.
- Cable tension — a first re-tension after the initial season, then a periodic check of the cables and turnbuckles.
- Steel & connections — inspect the galvanising and the mast and ring connections.
Gazebo & conical structures we’ve built
Each project is documented with site photographs and recorded scope on its own page.
Industrial · Sail canopyNTPC GazeboPower-plant campus
Hospitality · Conical structureBanquet HallIndore, MP
/diu-2200sqm.webp)
Public · Conical pavilionDiu PavilionDiu
Hospitality · Tiered domeParty HallGarden venue
Hospitality · Event-area canopyGolden Event PalaceMoradabad, UP
Residential · Pool sail canopySun ViewLudhiana, Punjab
Backyard gazebo canopy FAQ
The questions homeowners ask before commissioning a garden gazebo canopy.
It is designed and built to your garden. The form, the size, the membrane colour and the frame are all set to the space — and the structure is form-found and wind-engineered, not a bolt-together kit.
From a compact sail over a hot tub to a cone or dome over a full garden seating area. The span is limited by the form and the local wind zone.
A small canopy goes up quickly — the steel and membrane are made off-site, so on-site work is casting small footings and erecting the frame, usually with little disruption to the garden.
Yes — small pad footings, designed to IS 456 and sized for wind uplift. A lean-to version can also fix back to the house wall.
Whatever suits the house and garden. A light tone reflects more heat and keeps the underside cooler; a PVDF finish holds its colour and stays cleaner if the canopy faces the sun.
Yes — a mono-pitch lean-to canopy fixes to the wall where a free-standing frame does not fit.
There is no fixed rate. Cost depends on the size, the form, the height, the membrane and the wind zone. Send a plan or a photo of the area for an itemised quote.
Send us a photo of your garden
You get a form suggestion, a colour direction and an itemised quote.
Let’s Build Your Structure
Speak directly with our structural engineering team to discuss your project dimensions, material options, or to schedule a free on-site technical inspection across India.
Direct Phone & WhatsApp Hotlines
+91 98102 37952 (Delhi HQ) / +91 93159 45187 (Bangalore) / +91 82879 92289 (Engineering)
Official Email Address
Delhi Factory & Administrative HQ
No. 367 Badam Singh Market, Rangpuri, Near Shiv Murti, NH-8, New Delhi 110037
Bangalore Regional Office
93/5, Kada Agrahara Village, Dodda Gubbi Post, Bangalore, Karnataka - 560077, India
Chattarpur Office
House No. 488, 3rd Floor, Khasra No. 60, 100 Futa Road, Opposite Delhi Jal Board, Near Diwan Bajaj Showroom, Chattarpur Pahari, New Delhi - 110074, India
Request Itemized Price Quote
Fill in your requirements below for an instant engineering assessment & 3D estimate.